1. Description
Chase friction testing machine is used to evaluate the frictional characteristics of material in braking system in accordance with the SAE J661,GB 5763-2018 and GB/T 17469-2012.
Chase machine is suitable for small bench test of M1, M2, N1, O1 and O2 vehicles brake linings.
This machine is widely used for product formulation R&D, Quality control and Certification etc.
2. Principle
A constant pressure is applied to the sample,which will be pressed against the inner surface of the friction drum which rotates at a certain speed, so a friction force will be generated along the tangent direction of the contact surface. The friction coefficient of the tested sample can be determined by measuring the pressure and friction force.
During the test, the Chase friction tester controls the temperature change at any time according to the requirements. The drum outer ring is used to assist the heating tube heating and the back suction cooling, so that the temperature change at the sample is stable and the temperature measurement accuracy is higher.  
3. Features
(1) Loading by Pneumatic servo with high precision control.
(2) Temperature of friction drum is adjustable to adapt to different test requirements and different climatic condition.
(3) Rubbing speed can be set freely between 0 and 1000 RPM.
(4) The maximum  load is up to 2000N.
(5) This machine is controlled by PC. Speed, loads, temperature and test time can be preset by software. Test results are saved in computer.
4. Standards
    SAE J661, SAE J866, GB 5763-2018, GB/T 17469-2012, ECE-R90
5. Specifications   

Speed	0 to 1000 RPM
Load	0 to 2000 N
Temperature	0-600 (1112)
Heating power	6KW
Friction drum	277mm
Power	AC 380V
Weight	Approximate 2100kg